lite- o n tech no lo g y co rp o ratio n property of lite-on only features * isolation voltage between input and output v iso : 5,000v rms * 6pin dip photocoupler, triac driver output * high repetitive peak off-state voltage v drm : min. 600v * high critical rate of rise of off-state voltage ( dv/dt : min. 1000v / m s ) * dual-in-line package : MOC3052 * wide lead spacing package : MOC3052m * surface mounting package : MOC3052s * tape and reel packaging : MOC3052s-ta1 * ul approved ( no. e113898 ) * csa approved ( no. ca91533-1 ) * fimko approved ( no. 15469 ) * nemko approved ( no. p00102123 ) * demko approved ( no. 309968-01 ) * semko approved ( no. 0032019/01-11 ) * vde approved (no. 094722 ) application * incandescent lamp dimmers * interfacing microprocessors to 115 and 240 vac peripherals * lamp ballasts * motor controls * solid state relays * static ac power switch * solenoid / valve controls * temperature controls part no. : MOC3052 series page : 1 of 9 bns-od-c131/a4
lite- o n tech no lo g y co rp o ratio n property of lite-on only outline dimensions dual-in-line package : wide lead spacing package: *1. year date code. *2. 2-digit work week. *3. factory identification mark shall be marked (z : taiwan, y : thailand). *4. model no.: MOC3052 part no. : MOC3052 series page : 2 of 9 bns-od-c131/a4
lite- o n tech no lo g y co rp o ratio n property of lite-on only outline dimensions surface mounting package : *1. year date code. *2. 2-digit work week. *3. factory identification mark shall be marked (z : taiwan, y : thailand). *4. model no.: MOC3052 part no. : MOC3052 series page : 3 of 9 bns-od-c131/a4
lite- o n tech no lo g y co rp o ratio n property of lite-on only taping dimensions tape and reel package : MOC3052s-ta1 description symbol dimensions in mm ( inches ) tape wide w 16 0.3 ( .63 ) pitch of sprocket holes p 0 4 0.1 ( .15 ) distance of compartment f p 2 7.5 0.1 ( .295 ) 2 0.1 ( .079 ) distance of compartment to compartment p 1 12 0.1 ( .472 ) part no. : MOC3052 series page : 4 of 9 bns-od-c131/a4
lite- o n tech no lo g y co rp o ratio n property of lite-on only absolute maximum rating ( ta = 25 c ) parameter symbol rating unit forward current i f 50 ma reverse voltage v r 6 v input power dissipation p d 100 mw off-state output terminal voltage v drm 600 v peak repetitive surge current ( pw=100 m s, 120pps ) i tsm 1 a output collector power dissipation p c 300 mw total power dissipation p tot 330 mw *1 isolation voltage v iso 5,000 vrms ambient operating temperature range t a -40 ~ +100 c storage temperature range t stg -55 ~ +150 c *2 soldering temperature t l 260 c *1. ac for 1 minute, r.h. = 40 ~ 60% isolation voltage shall be measured using the following method. (1) short between anode and cathode on the primary side and between collector, emitter on the secondary side. (2) the isolation voltage tester with zero-cross circuit shall be used. (3) the waveform of applied voltage shall be a sine wave. *2. for 10 seconds part no. : MOC3052 series page : 5 of 9 bns-od-c131/a4
lite- o n tech no lo g y co rp o ratio n property of lite-on only electrical - optical characteristics ( ta = 25 c ) parameter symbol min. typ. max. unit conditions forward voltage v f 1.2 1.4 v i f =20ma input reverse current i r 0.05 10 m a v r =6v *1 peak blocking current, either direction i drm 100 na v drm = 600v peak on-state voltage, either direction v tm 3.0 v i tm =100 ma peak output *2 critical rate of rise of off-state voltage dv/dt 1000 v/ m s *3 led trigger current, current required to latch output, either direction i ft 10 ma main terminal voltage = 3v coupled holding current, either direction i h 400 m a *1 test voltage must be applied within dv/dt rating. *2 this is static dv/dt. commutating dv/dt is a function of the load-driving thyristor(s) only. *3 all devices are guaranteed to trigger at an i f value less than or equal to max i ft . therefore, recommended operating i f lies between max 10ma for MOC3052 and absolute max i f (50ma) part no. : MOC3052 series page : 6 of 9 bns-od-c131/a4
lite- o n tech no lo g y co rp o ratio n property of lite-on only characteristics curves fig.1 forward current vs. fig.2 on-state current vs. ambient temperature fig.4 forward current vs. forward 0 -40 60 c 40 c 20 c ambient temperature fig.6 holding current vs. temperature fig.5 on-state voltage vs. ambient fig.3 minimum trigger current vs. ambient temperature i , o n - s t a t e c u r r e n t ( a ) ambient temperature ta ( c) ambient temperature ta ( c) ambient temperature ( c) ambient temperature ta ( c) ambient temperature ta ( c) 0 20 40 60 80 100 60 0 0.4 1 2.0 0.01 20 40 60 80 100 20 1.0 100 20 0 10 oo o ambient temperature o o voltage 3.0 10 100 86 4 2 50 40 30 20 10 100 1 o 80 c o 100 c 0.05 0.10 t m v p = 6v r l = 100 2.6 2.2 1.4 1.8 40 80 60 o v p = 6v 0.8 1.2 1.6 o 80 60 40 o 0.1 120 -20 -40 -20 0 80 40 20 60 100 120 i tm = 100ma o n - s t a t e v o l t a g e v t m ( v ) m i n i m u m t r i g g e r c u r r e n t i f t ( m a ) f o r w a r d c u r r e n t i f ( m a ) f o r w a r d c u r r e n t i f ( m a ) forward voltage v f (v) f o r w a r d c u r r e n t i h ( m a ) part no. : MOC3052 series page : 7 of 9 bns-od-c131/a4
lite- o n tech no lo g y co rp o ratio n property of lite-on only characteristics curves fig.7 turn-on time vs. forward current fig.8 repetitive peak off-state current fig.9 on-state current vs. on-state voltage vs. temperature 0 r e p e t i t i v e p e a k o f f - s t a t e c u r r e n t i d r m ( n a ) ambient temperature ta ( c) 50 80 20 100 1 3.0 1.5 0 o 0 100 40 30 20 10 80 60 40 0.5 2.0 2.5 1.0 80 60 40 20 10 100 basic driver circuit + vcc 12 3 45 6 control t u r n - o n t i m e t o n ( s ) forward current i f (ma) o n - s t a t e c u r r e n t i t m ( m a ) 20 40 60 r load ac line r led ret. power triac triac driver r led = (vcc-v f led-v sat q)/ i ft r= v p ac line/i tsm q 1000 v p = 9v r l = 100 on-state voltage v tm (v) recommended foot print patterns (mount pad) unit : mm part no. : MOC3052 series page : 8 of 9 bns-od-c131/a4
lite- o n tech no lo g y co rp o ratio n property of lite-on only notes: - lite-on is continually improving the quality, reliability, function or design and lite-on reserves the right to make changes without further notices. - the products shown in this publication are designed for the general use in electronic applications such as office automation equipment, communications devices, audio/visual equipment, electrical application and instrumentation. - for equipment/devices where high reliability or safety is required, such as spac e applications, nuclear power control equipment, medical equipment, etc, please contact our sales representatives. - when requiring a device for any specific application, please contact our sales i n advice. - if there are any questions about the contents of this publication, please contact us at your convenience. - the contents described herein are subject to change without prior notice. - no contacting on pin 5. - inhibit immersing units body in solder paste. part no. : MOC3052 series page : 9 of 9 bns-od-c131/a4
|
